The sliding coldroom & freezer doors with automation are manufactured at our facilities, utilizing the German know-how that we have acquired collaborating with the biggest German raw materials manufacturers of the sector.
Our experience in combination with the excellent quality raw materials & state-of-art latest technology equipment & handmancraft allow us to manufacture doors of high endurance & thermal insulated according to the European HACCP regulations and with the necessary CE certifications.
Automatic activation of sliding door via a mechanism with a motor of DC voltage 220 Volt connected to a multifunction panel. Switchgear IP 56 is suitable for installation in a moist environment and includes an electronic circuit for controlling the functions and an 0,5 kW inverter to control the paths during operation of the opening-closing and the necessary needs in electrical power in respect to the security settings.
All automation system is pre-cabled therefore the connection of the board becomes easy through a multipolar connector which is located at the bottom of the board. There are already pre-installed factory settings which are easily changed depending on the needs of each user.
Speed is set to 0,27 m / sec (as per regulations). The 0,37 kW engine has a reversible reducer. The primary safety device for crash protection is a sensitive bar resistant type, located on the vertical edge of the door panel, which in case of impact with an obstacle, automatically stops the door and reverses motion, sending a signal to the board.
The electronic system of protection against electromagnetic effects is applied on the side of the door. The controls of the STOP (end of movement) during the opening and closing by a micro switch is activated by IP 66 cables. The transmission is through a chain with adjustable power and not with tapes for cost reasons with breakage problems.
A yellow light is flashing signals that the door is in motion. Besides the many arrangements for opening - closing the door from the board, two cords connected to switches are placed in front and behind the door (at desired distances) to facilitate the operator of the forklift at the entrance and exit of the cold room.
The upper automation system for sliding electric doors is CE certified.
Finally, in case of power failure the door is operated manually.
Based on the specialized quality control department, we offer PVC frame-counter frame (CPR system) & a wide range of color selection at plastisol sanisteel colours (foodsafe steel sheets).
We offer possibility of construction of any cold room door dimension requested with flexible and fast delivery.
The automated sliding cold rooms doors are being manufactured by industrial refrigeration manufacturer AMP at its own facilities (16.000 m2) in Kryoneri Attica Greece.
For the technical sheets for automatic sliding doors, press the following link: